조교수 정수광
문화관 502호
소속 / 직급 숭실대학교 건축학부 / 조교수
전공분야 건축환경설비 및 에너지
최종학위 / 자격증 건축공학박사(숭실대학교 2017.02) / 건물 기밀측정 전문가(Lv.1), 공인패시브하우스디자이너, 건축기사 1급
직급별 근무연수
2014.03 – 2017. 02 숭실대학교 공과대학 건축학부 건축공학과 시간강사
2017.03 – 2018. 02 숭실대학교 공과대학 건축학부 건축공학과 초빙교수
2018.01 – 2020. 01 미국 펜실베니아 주립대학교 건축공학과 박사 후 연구원
2020.03 – 현재 숭실대학교 공과대학 건축학부 건축공학과 조교수
학위사항
2005.03 – 2011. 02 숭실대학교 공과대학 건축학 학사
2011.03 – 2013. 02 숭실대학교 공과대학 건축학 석사
2013.03 – 2017. 02 숭실대학교 공과대학 건축학 박사
수상경력 및 전시
2011 대한건축학회 졸업논문전 우수상 수상
2011 한국건축친환경설비학회 우수발표 논문상
2012 한국건축친환경설비학회 우수발표 논문상
2013 대한건축학회 우수발표 논문상 3건
2013 한국태양에너지학회 우수발표 논문상
2013 한국태양에너지학회 친환경건축디자인공모전 입선
2015 한국건축친환경설비학회 우수발표 논문상
2015 실내환경학회 우수논문상
2016 한국건축친환경설비학회 우수발표 논문상 2건
2016 한국태양에너지학회 우수발표 논문상
2017 한국태양에너지학회 우수발표 논문상
2017 한국건축친환경설비학회 우수발표 논문상 2건
2021 한국태양에너지학회 우수발표 논문상
2017 한국태양에너지학회 신진과학자상
소속 전문학술단체 및 학회 (현재)
2011 – 현재 대한건축학회 정회원
2011 – 현재 친환경설비학회 정회원
2011 – 현재 한국태양에너지학회 정회원
2021 – 현재 한국건축친환경설비학회 이사
2022 – 현재 대한건축학회 논문편집위원
2022 – 현재 생태환경학회 교육부이사
2022 – 현재 한국그린빌딩협의회
Guest Editor
2021 – 2022 Processes [Special issue]
2022 – 2023 Environmental Pollution [Special issue]
주요 논문 및 실적
국외논문
2012
High thermal performance composite PCMs loading xGnP for application to building using radiant floor heating system, Solar Energy Materials and Solar Cells, 101; 51-56, 2012, Jisoo Jeon, Su-Gwang Jeong, Jeong-hun Lee, Sumin Kim
Performance evaluation of the microencapsulated PCM for wood-based flooring application, Energy Conversion and Management, 64; 516-521, 2012, Su-Gwang Jeong, Jisoo Jeon, Jungki Seo, Jeong-Hun Lee, Sumin Kim
2013
Application of PCM thermal energy storage system to reduce building energy consumption, Journal of Thermal Analysis and Calorimetry, 111; 279-288, 2013, Jisoo Jeon, Jeong-Hun Lee, Jungki Seo, Su-Gwang Jeong, Sumin Kim
Optimal preparation of PCM/diatomite composites for enhancing thermal properties, International Journal of Heat and Mass Transfer, 62; 711–717, 2013, Su-Gwang Jeong, Jisoo Jeon, Jeong-Hun Lee, Sumin Kim
Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete, Energy and Buildings, 62; 190–195, 2013, Su-Gwang Jeong, Jisoo Jeon, Junghoon Cha, Junhyun Kim, Sumin Kim
Improvement of the thermal properties of Bio-based PCM using exfoliated graphite nanoplatelets, Solar Energy Materials & Solar Cells, 117; 87–92, 2013, Su-Gwang Jeong,Okyoung Chung,Seulgi Yu, Sughwan Kim, Sumin Kim
Evaluation of PCM/diatomite composites using exfoliated graphite nanoplatelets (xGnP) to improve thermal properties, Journal of Thermal Analysis and Calorimetry, 114(2); 689-698, 2013, Su-Gwang Jeong, Jisoo Jeon, Okyoung Chung, Sughwan Kim, Sumin Kim
Preparation of Shape Stabilized PCMs by Vacuum Impregnating Method of Diatomite, Advanced Materials Research, 630; 71-74, 2013, Su-Gwang Jeong, Jeong-Hun Lee and Sumin Kim (SCOPUS)
2014
Bio-based PCM/carbon nanomaterials composites with enhanced thermal conductivity, Solar Energy Materials & Solar Cells, 120; 549–554, 2014, Seulgi Yu, Su-Gwang Jeong, Okyoung Chung, Sumin Kim
Thermal performance of organic PCMs/micronized silica composite for latent heat thermal energy storage, Energy and Buildings, 70; 180-185, 2014, Okyoung Chung, Su-Gwang Jeong, Seulgi Yu, Sumin Kim
Thermal characteristics of mortar containing hexadecane/xGnP SSPCM and energy storage behaviors of envelopes integrated with enhanced heat storage composites for energy efficient buildings, Energy and Buildings, 70; 472-479, 2014, Sughwan Kim, Seong Jin Chang, Okyoung Chung, Su-Gwang Jeong, Sumin Kim
Thermal performance enhancement of mortar mixed with octadecane/xGnP SSPCM to save building energy consumption, Solar Energy Materials & Solar Cells, 122; 257–263, 2014, Sughwan Kim, Songyee Paek, Su-Gwang Jeong, Jeong-Hun Lee, Sumin Kim
Preparation of epoxy resin using n-hexadecane based shape stabilized PCM for applying wood-based flooring, Journal of Adhesion Science and Technology, 28(7); 711–721, 2014, Su-Gwang Jeong, Sumin Kim, Wansoo Huh
Thermal performance evaluation of Bio-based shape stabilized PCM with boron nitride for energy saving, International Journal of Heat and Mass Transfer, 71; 245–250, 2014, Su-Gwang Jeong, Jeong-Hun Lee, Jungki Seo, Sumin Kim
Preparation of thermal-enhanced epoxy resin adhesive with organic PCM for applying wood flooring, Journal of Thermal Analysis and Calorimetry, 117(3); 1027-1034, 2014, Su-Gwang Jeong, Junghoon Cha, Sughwan Kim, Jungki Seo, Jeong-Hun Lee, Sumin Kim
2015
Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildings, Solar Energy Materials & Solar Cells, 137; 107–112, 2015, Okyoung Chung, Su-Gwang Jeong, Sumin Kim
Formaldehyde emissions from particle board made with phenol-urea-formaldehyde resin prepared by different synthesis methods, Journal of Adhesion Science and Technology, 29(19); 2090-2013, 2015, Junhyun Kim, Jeong-Hun Lee, Su-Gwang Jeong, Sumin Kim
Energy efficient thermal storage montmorillonite with phase change material containing exforliated graphite nanoplatelets, Solar Energy Materials & Solar Cells, 139; 65–70, 2015, Su-Gwang Jeong, Seong Jin Chang, Seunghwan We, Sumin Kim
Development of Thermally Enhanced Wood-Based Materials with High VOCs Adsorption using Exfoliated Graphite Nanoplatelets for Use as Building Materials, BioResources, 10(4); 7081-7091, 2015, Hyun Jeong Seo, Su-Gwang Jeong, Sumin Kim
Evaluation of the Adsorption Performance and Sustainability of Exfoliated Graphite Nanoplatelets(xGnP) for VOCs, Materials, 8; 7615-7621, 2015, Seong Jin Chang, Seunghwan Wi, Su-Gwang Jeong and Sumin Kim
Thermal properties of shape-stabilized phase change materials using fatty acid ester and exfoliated graphite nanoplatelets for saving energy in buildings, Solar Energy Materials & Solar Cells, 143; 168–173, 2015, Seunghwan Wi, Jungki Seo, Su-Gwang Jeong, Seong Jin Chang, Yujin Kang, Sumin Kim
Energy efficient Bio-based PCM with silica fume composites to apply in concrete for energy saving in buildings, Solar Energy Materials & Solar Cells, 143; 430–434, 2015, Yujin Kang, Su-Gwang Jeong, Seunghwan Wi, Sumin Kim
Development and performance evaluation of heat storage paint with MPCM for applying roof materials as basic research, Energy and Buildings, 112; 62-68, 2015, Su-Gwang Jeong, Seong Jin Chang, Seunghwan Wi, Yujin Kang, Sumin Kim
2016
Performance evaluation of infrared Bake-Out for reducing VOCs and Formaldehyde emission in MDF panels, Bioresources, 11(1); 1214-1223, 2016, Jeong-Hun Lee, Su-Gwang Jeong, Sumin Kim
Energy efficient concrete with n-octadecane/xGnP SSPCM for energy conservation in infrastructure, Construction and Building Materials, 106; 543-549, 2016, Su-Gwang Jeong, Seong Jin Chang, Seunghwan Wi, Yujin Kang, Jae-Han Lim, Jae D. Chang, Sumin Kim
Thermal performance evaluation of macro-packed phase change materials (PCMs) using heat transfer analysis device, Energy and Buildings, 117; 120-127, 2016, Seong Jin Chang, Seunghwan Wi, Su-Gwang Jeong, Sumin Kim
Thermal Performance Evaluation of Fatty Acid Ester and Paraffin Based Mixed SSPCMs Using Exfoliated Graphite Nanoplatelets (xGnP), Applied Sciences, 6(4); 106, 2016, Hwayoung Lee, Su-Gwang Jeong, Seong Jin Chang, Yujin Kang, Seunghwan Wi, Sumin Kim
Improvement of Thermal Conductivity of Underlay Foam for Laminate Flooring to Reduce Heating Energy, Bioresources, 11(4); 9059-9067, 2016, Jungki Seo, Su-Gwang Jeong, Sumin Kim, Wansoo Huh
2017
Development of heat storage gypsum board with paraffin-based mixed SSPCM for application to buildings, Journal of Adhesion Science and Technology, 31(3); 297-309, 2017, Su-Gwang Jeong, Seong Jin Chang, Seunghwan Wi, Yujin Kang, Hwayoung Lee, Sumin Kim
Hygrothermal performance improvement of the Korean wood frame walls using macro-packed phase change materials (MPPCM), Applied Thermal Engineering, 114(5); 457-465, 2017, Seong Jin Chang, Yujin Kang, Seunghwan Wi, Su-Gwang Jeong, Sumin Kim
Energy efficient layered-PCM gypsum board with fatty acid ester for heat storage, Energy Technology, 5(8); 1392-1398, 2017, Seunghwan Wi, Su-Gwang Jeong, Seong Jin Chang, Jongki Lee, Sumin Kim
Empirical Validation of Heat Transfer Performance Simulation of GraphitePCM Concrete Materials for Thermally Activated Building System, International Journal of Polymer Science, 2017, 9pages, 2017, Jin-Hee Song, Hye-Sun Jin, Su-Gwang Jeong, Sumin Kim, Seung-Yeong Song, Jae-Han Lim
Energy performance evaluation of heat-storage gypsum board with hybrid SSPCM composite, Journal of Industrial and Engineering Chemistry, 51; 237-243, 2017, Su-Gwang Jeong, Seong Jin Chang, Seunghwan Wi, Jongki Lee, Sumin Kim
Evaluation of Toluene Adsorption Performance of Mortar Adhesives Using Porous Carbon Material as Adsorbent, Materials, 10(8); 853, 2017, Seunghwan Wi, Seong Jin Chang, Su-Gwang Jeong, Jongki Lee, Taeyeon Kim, Kyung-Won Park, Dong Ryeol Lee, Sumin Kim
Development of thermal enhanced n-octadecane/porous nano carbon-based materials using 3-step filtered vacuum impregnation method, Thermochimica Acta, 655(10); 194-201, 2017, Jongki Lee, Seunghwan Wi, Su-Gwang Jeong, Seong Jin Chang, Sumin Kim
Performance evaluation of macro-packed fatty acid ester composites using energy-efficient thermal storage systems, Journal of Industrial and Engineering Chemistry, 55; 215-223, 2017, Seunghwan Wi, Su-Gwang Jeong, Seong Jin Chang, Jongki Lee, Sumin Kim
Evaluation of energy efficient hybrid hollow plaster panel using phase change material/xGnP composites, Applied Energy, 205; 1548-1559, 2017, Seunghwan Wi, Su-Gwang Jeong, Seong Jin Chang, Jongki Lee, Sumin Kim
2018
Analysis on phase transition range of the pure and mixed phase change materials (PCM) using a thermostatic chamber test and differentiation, Journal of Thermal Analysis and Calorimetry, 131; 1999-2004, 2018, Seong Jin Chang, Seunghwan Wi, Su-Gwang Jeong, Sumin Kim
2019
An experimental study on applying organic PCMs to gypsum-cement board for improving thermal performance of buildings in different climates, Energy and Buildings, 190; 183-194, 2019, Su-Gwang Jeong, Seunghwan Wi, Seong Jin Chang, Jongki Lee, Sumin Kim
Dynamic behavior of indoor ultrafine particles (2.3‐64 nm) due to burning candles in a residence, Indoor Air, 29(6); 1018-1027, 2019, Lance Wallace, Su-Gwang Jeong, Donghyun Rim
2020
Numerical analysis of phase change materials_wood–plastic composite roof module system for improving thermal performance, Journal of Industrial and Engineering Chemistry, 82; 413-423, 2020, Seong Jin Chang, Seunghwan Wi, Hyun Mi Cho, Su-Gwang Jeong, Sumin Kim
2021
Application of pre-filter system for reducing indoor PM2.5 concentrations under different relative humidity levels, Building and Environment, 192; 107631, 2021, Su-Gwang Jeong, Minju Kim, Taemin Lee, Jeonghun Lee
Contributions of Coagulation, Deposition, and Ventilation to the Removal of Airborne Nanoparticles in Indoor Environments, Environmental Science and Technology, 55; 9730-9739, Su-Gwang Jeong, Lance Wallace, Donghyun Rim
Energy performance evaluation of heat storage of calcium sulfate hemihydrate composite with fine aggregate based on paraffinic phase change material, Journal of Building Engineering, 42; 103075, Su-Gwang Jeong, Seunghwan Wi, Seong Jin Chang, Sumin Kim
Assessment of pre-filter systems to control indoor inflow of particulate matter, Journal of Building Engineering, Minju Kim, Su-Gwang Jeong, Jongil Park, Jeong-Hun Lee
Evaluation of Energy Performance and Thermal comfort Considering the Heat Storage Capacity and Thermal Conductivity of Biocomposite Phase Change Materials, Processes, Su-Gwang Jeong, Tamin Lee, Jeong-Hun Lee
국내논문
2011
건축물에너지 저감을 위한 Phase change material(PCM) 적용에 대한 고찰, 한국건축친환경설비학회논문집, 5(1); 7-15, 2011, 정수광, 전지수, 서정기, 김수민
재래시장 아케이드의 열 차단 효과와 투과율에 따른 온열환경 분석, 한국건축친환경설비학회논문집, 5(3); 137-143, 2011, 유슬기, 김지경, 정주희, 정수광, 김수민
2012
건축자재에 의한 실내 오존제거 및 제어에 대한 고찰, 설비공학논문집, 24(6); 467-475, 2012, 정옥영, 정수광, 김준현, 김수민
2013
축열건축자재 적용을 위한 Hexadecane/xGnP SSPCM 제조 및 열적특성, 한국태양에너지학회논문집, 33(1); 73-78, 2013, 김석환, 정수광, 임재한, 김수민
건축물 축열성능 향상을 위한 Octadecaen/xGnP 제조 및 열적성능 분석, 설비공학논문집, 25(3); 126-130, 2013, 김석환, 정수광, 이정훈, 김수민
패시브 하우스(Passive House) 소개 및 기준에 대한 고찰, 한국건축친환경설비학회논문집, 7(1); 38-47, 2013, 차정훈, 김석환, 정수광, 김수민, 최정만
건축적용을 위한 다공성 물질을 이용한 상안정 PCM 제조, 설비공학논문집, 25(8); 432-437, 2013, 정수광, 유슬기, 장슬애, 박진성, 김태현, 이정훈, 김수민
2015
축열 성능 향상 SSPCM 혼합 콘크리트 제조 및 열적특성 분석, 한국태양에너지학회논문집, 35(1); 89-96, 2015, 정수광, 장성진, 임재한, 김희선, 류성룡, 김수민
석고보드의 첨가제에 따른 오염물질 흡착 및 축열 성능에 대한 고찰, 한국태양에너지학회논문집, 35(1); 97-106, 2015, 서현정, 정수광, 임재한, 김수민
Current Status of Researches on low-VOCs Emission Materials and Heat Storage Materials in Korea, Journal of the Society of Living Environment System, 22(4); 545-558, 2015, Sughwan Kim, Jeong-Hun Lee, Su-Gwang Jeong, Sumin Kim
도시 열섬현상 저감을 위한 MPCM 적용 축열도료 제조 및 열적성능 평가, 한국태양에너지학회논문집, 35(4); 17-24, 2015, 정수광, 강유진, 위승환, 장성진, 김수민
2016
국내 농어촌 표준 목조주택의 hygrothermal 성능 분석, 목재공학, 44(3); 440-448, 2016, 장성진, 강유진, 위승환, 정수광, 김수민
2017
Sound Absorption Performance Analysis According to Existence and Shape of the Road Noise Barrier, Journal of the Society of Living Environment System, 24(4); 526-532, 2017, Ah Yong Shin, So Yoon Kho, Hwayoung Lee, Su-Gwang Jeong, Sumin Kim
PCM 기반 축열골재 혼합비율에 따른 석고보드의 열적성능 분석, 한국생활환경학회지, 24(3); 399-405, 2017, 이준희, 정수광, 장성진, 강유진, 이화영, 김수민
목질 마감재 구성에 따른 주거용 건축물 부위별 열교 및 전열성능 분석, 목재공학, 45(3); 343-359, 2017, 서정기, 정수광, 김수민
2022
머신러닝을 활용한 지역별 환경요소의 미세먼지 기여도 분석, 한국생활환경학회지, 29(2); 130-148, 2022, 김민주, 정수광, 이정훈
국내 농어촌 표준주택에서 PCM 종류별 건물 냉난방 부하 저감 효과 및 온열쾌적성 평가, 한국생활환경학회지, 29(4); 365-374, 2022, 서동희, 최상호, 정수광